For buildings that never close.
We refinish doors, elevators and interiors with architectural film, so places like hotels, senior living communities and office buildings can look new again while staying open for business.
- Film ratingClass A, ASTM E84
- Compared with replacingUp to 70% less
- Certified installers3M DI-NOC and LX Hausys Benif
- Based inJupiter, FL. Working nationwide
Same doors.
A brand new look.
These hotel guest room doors were worn and dated. We wrapped them in a dark walnut finish with the frames, locks and hardware left in place, and every room went right back into service.
- No new doorsThe original doors stayed on their hinges.
- Same dayEach room went back on sale the day it was done.
- Class A filmFire rated for hotel corridors.
BeforeAfter
How a project runs

Photos
Text us pictures with rough sizes and counts. You get a ballpark within one business day.
Walkthrough
We measure, check surface condition and fire labels, and bring finish samples.
Quote and schedule
A written quote, then a plan built around occupancy, check ins and quiet hours.
Install
We work area by area and finish with a walkthrough alongside your team.
Where film pays off most
-
01
Elevator cabs and landings
Everyone in the building rides them, and the landings greet people on every floor.
- Cab walls, cab doors and trim
- Hall doors, frames and surrounds on every floor
- One elevator out of service at a time
-
02
Teller lines and branch millwork
Make every branch match without rebuilding it.
- Teller lines, private offices and lobby millwork
- Done after hours so the branch opens on time
- One finish rolled out branch by branch
-
03
Front desks
The first surface guests touch when they walk in.
- Stone, wood or metal looks
- No demolition in the lobby
- Done overnight or in sections
-
04
Doors and frames
Usually the biggest line on the quote, and the biggest savings.
- Guest room, condo, senior living and office doors
- Wood or metal, including fire rated doors with labels left visible
- Hardware off and back on, room back in service the same day
-
05
Countertops
A stone or wood look without tearing out the counter.
- Reception, vanity, bar and display counters
- Marble, granite and wood looks
- Best for light to moderate use, not cutting or hot pans
-
06
Lobby columns and walls
A big visual change for the money.
- Round and square columns
- Grain and veining matched at seams
- Little to no dust in public areas
-
07
Bars and restaurants
Finished overnight, open on time the next day.
- Bar fronts, booths and host stands
- Leather, stone and wood looks
- No lost service nights
-
01
Hotels and resorts
Keep selling rooms while the property gets a new look.
- Guest room doors, corridors and elevators
- Front desks and casegoods
- Planned around occupancy and PIP deadlines
-
02
Banks and credit unions
One finish, repeated at every branch.
- Teller lines and private offices
- Lobby millwork
- Rolled out branch by branch
-
03
Office buildings
Tenants come in to a finished lobby.
- Elevator cabs and landings
- Lobby desks and suite doors
- Nights and weekends
-
04
Condos and HOAs
Every floor updated as one project.
- Lobbies, mail rooms and elevators
- Unit doors on every floor
- Sample boards for the board meeting
-
05
Senior living
Residents stay in their homes the whole time.
- No demolition dust in the halls
- Apartment doors done in short visits
- A different door finish for each wing
-
06
Medical and dental offices
Wipeable surfaces without the construction.
- Check in desks
- Exam room cabinets and doors
- Little to no dust in the office
-
07
Restaurants and retail
Done overnight so you open on time.
- Bar fronts, booths and counters
- Host stands and fixtures
- Leather, stone and wood looks
Same surface.
New finish.
BeforeAfter
What we refinish
If a surface is smooth and solid, film can usually go on it. Wood, MDF, laminate, painted metal and glass all work.

Elevators
Cab walls and cab doors, plus the hall doors and frames on every landing.

Doors and frames
Guest room, corridor, unit entry, office and stairwell doors. Wood or hollow metal.

Desks, walls and millwork
Front desks, columns, accent walls, casegoods, vanities, bars and conference tables.

Yacht interiors
Cabinetry, bulkheads, cabin doors and headliners, done right at the dock.
Class A. The top rating for interior finish.
Commercial interiors are rated by the ASTM E84 tunnel test, which measures how fast flame travels across a surface. The films we install test Class A. That matters in corridors and stairwells, where codes are strictest.
ASTM E84 flame spread index
Every room starts with a door.
Guests walk past dozens of them on the way to their room. Residents and tenants open theirs every day. When the doors are scuffed, chipped or just stuck in an older style, the whole building looks dated, no matter how nice the lobby is.
We refinish the doors you already have. The hardware comes off, the surface gets cleaned, any real damage gets filled and smoothed, and a new wood, stone or metal finish wraps the face, edges and frame. The doors don't have to be damaged. Plenty of our clients just want an updated look. The hardware goes back on, and the room is ready the same day.
Refinish or replace?
Here's what changes on a typical door or elevator project.
| Refinish with film | Tear out and replace | |
|---|---|---|
| Cost | Up to 70% less | New material, labor and disposal |
| Demolition | None | Old doors, panels or millwork hauled out |
| Lead time | Film ships in days | Custom doors and cab interiors can take months |
| Rooms and floors | One room or one cab at a time | Whole areas closed during construction |
| Trades on site | One installer | Carpenters, painters, hardware and cleanup |
| Fire rating | Class A film | Depends on the new material |
| Next refresh | Film comes off and new film goes on | Start over |
Hundreds of finishes
A few of the looks our clients pick most. We bring real samples to every walkthrough.









Questions we get every week
What is architectural film?
It's a thin, tough vinyl finish with a pressure sensitive adhesive on the back. It comes in wood grains, stone, metals, leathers and solid colors, many with a texture you can feel. We apply it over the doors, panels, desks and millwork you already have. 3M DI-NOC and LX Hausys Benif are the two names you'll hear most.
Is the film fire rated?
Yes. The 3M DI-NOC and LX Hausys Benif films we install test Class A under ASTM E84, which is the top rating for interior wall and ceiling finishes. A Class A material has a flame spread index of 25 or less. We can send the product data sheets to your fire marshal or facilities team.
Do we have to close rooms or floors?
No. There's no demolition and nothing to cure, so we work one area at a time. In hotels we wrap guest room doors as rooms come off the board, do corridors during quiet hours and take one elevator out of service at a time.
How much cheaper is it than replacing?
Usually up to 70% less than tearing out and replacing doors, cab interiors or millwork. The price depends on how many pieces there are, their size and condition, and the finish you pick. Text photos and rough counts to (561) 802-1148 and we'll send a ballpark.
Do you work outside Florida?
Yes. We're based in Jupiter and work all over South Florida every week. For hotel groups, senior living operators, property managers and contractors with bigger projects, we travel anywhere in the country.
Tell us about your building
We answer every request within one business day. Photos help us price faster, so text them to (561) 802-1148 if you can.